Siemens SINUMERIK 802D Training Manual page 173

Section 2
Saving All data from Compact flash card
Notes
The following display can then be seen: The following display can then be seen:
The two files previously mentioned can be saved by copying the contents The two files previously mentioned can be saved by copying the contents
of the HMI and the NC/PLC directories into two archives. of the HMI and the NC/PLC directories into two archives.
The following picture describes this process: The following picture describes this process:
Move cursor to NC/
PLC directory and
press SK Copy
The destination should now be selected and the Paste function can be
used to save the files to the respective card. The destination is the
"Customer CF card"
C19
C19
SINUMERIK 802D sl Operating and Service Training Manual Page 3