Section 2
2.1
Additional G functions in more detail
Rounding, chamfer - RND, CHF, CHR
Function
You can insert a chamfer (CHF of CHR) or rounding (RND) elements
into a contour intersection.
Programming
CHF
CHR
RND
Angle - ANG
Function
If only one of the end points is known for a straight line, and an angu-
lar dimension is given on the drawing, this can be used for the
straight line path.
Programming
ANG
SINUMERIK 802D sl Operating and Service Training Manual
; insert chamfer, value is length of chamfer
; insert chamfer, value is side length of chamfer
; insert rounding, value is radius of rounding
; angle value for defining a straight line
Page 2
Notes
C94
C94