Section 2
2.1 Creating a work plan
An example program will be created using the following workpiece:
The work plan is used to define the steps which have to be carried
out to machine the workpiece.
Working Step Nr.
1
2
3
The slot mill can cut on the side and on the face, it is therefore good for the
complete machining of slots.
SINUMERIK 802D sl Operating and Service Training Manual
Creating a work plan
Operation
Surface milling
Contour milling
Slot milling
Tools
End mill D60mm
End mill D60mm
Slot mill D6mm
Page 2
Notes
C77
C77