Hydraulic Power Unit; Hydraulic Power Unit - Ac Models (To Sn Awp03-27389 And Iwp03-5150); Hydraulic Power Unit - Ac Models - Genie AWP Super Series Service Manual

September 2016
Hydr aulic Power Unit
3-1 3-1 H ydr aulic Power U nit - AC M odels (to SN AW P03-27389 and IWP03- 5150)

Hydraulic Power Unit - AC Models

(to SN AWP03-27389 and IWP03-5150)
Index No. Description
1 115-230V AC electric motor
2 Capacitor
3 Relief valve
4 Solenoid operated N.O. dump valve
5 10V DC coil
6 Hydraulic tank
7 Drain plug
8 Sight gauge
9 Breather cap
10 Suction strainer
11 O-ring
12 Pump
13 Check valve
14 Motor seal
15 Motor bearing
Part No. 38139
Function
Single phase - 2850/3450 rpm, 50/60 Hz
Motor start circuit
Lift relief
Diverts pump output back to tank during motor start up
Activates N.O. dump valve
3 quarts / 2.8 liters
Drains hydraulic tank
Hydraulic fluid level
Hydraulic tank vent/filler
Filters hydraulic fluid
Seals tank
0.5 to 0.6 gallons per minute at 2000 psi /1.89 to 2.27
liters per minute at 138 bar
Pump output
Seals motor from contaminants
Aligns motor shaft into pump
AWP Super Series • IWP Super Series

Hydraulic Power Unit

Service Manual
77