Inspect For Damage And Loose Or Missing Parts - Genie AWP Super Series Service Manual

September 2016
A-4 Ins pect for Dam age and Loose or Missi ng Parts
A-4
Inspect for Damage and Loose or
Missing Parts
Genie specifications require that this procedure be
performed every 8 hours or daily, whichever comes
first.
Daily machine condition inspections are essential
to safe machine operation and good machine
performance. Failure to locate and repair damage,
and discover loose or missing parts may result in
an unsafe operating condition.
1 Inspect the entire machine for damage and
improperly installed or missing parts including:
• Electrical components, wiring and electrical
cables
• Electrical cable anchors and pulleys
• Hydraulic power unit, hoses, fittings,
cylinder(s) and manifolds
• Sequencing cables, anchors and pulleys
• Lifting chains and idler wheels
• Adjustable glide pads
• Mast columns and counterweight(s)
• Mast covers
• Nuts, bolts and other fasteners
• Platform entry mid-rail or gate
• Breather cap
• Dents or damage to machine
• Corrosion or oxidation
• Cracks in welds or structural components
• IWPS models: Hydraulic manifolds and foot
pump
• IWPS models: Foot pads
• AWPS models: Outriggers, leveling jacks
and foot pads
Part No. 38139
IWPS models with Power Wheel Assist Option:
IWP-20S models with Outreach Option:
AWP Super Series • IWP Super Series
Checklist A Procedures
• Steer handle
• Hydraulic motor and hoses
• Locking bracket
• Handle and handle lock
• Outreach extension arms
• Chain and sprocket
Service Manual
37