Check The Tire Pressure - Awps Models With Rough Terrain Base Option; Check The Air Supply Lubricator Oil Level - Air Models - Genie AWP Super Series Service Manual

September 2016
A-16 C hec k the Tire Pressur e - AWPS M odels with R ough T errai n Bas e Option
A-16
Check the Tire Pressure - AWPS
Models with Rough Terrain Base
Option
Genie specifications require that this procedure be
performed every 8 hours or daily, whichever comes
first.
It is essential to maintain proper pressure in all
air-filled tires. Improperly inflated tires can affect
machine handling.
1 Check each tire with an air pressure gauge.
Add air as needed.
Models before serial number 3899-11837.
Tire pressure should be 30 psi / 2 bar in the
front and rear tires.
Models after serial number 3899-11836.
Tire pressure should be 50 psi / 3.4 bar in the
front and rear tires.
Part No. 38139
A-17 C hec k the Air Supply Lubricator Oil Lev el - Air Models
A-17
Check the Air Supply Lubricator
Oil Level - Air Models
Genie specifications require that this procedure be
performed every 8 hours or daily, whichever comes
first.
Maintaining the proper oil level in the lubricator
canister is essential to safe operation and good
machine performance. Failure to keep the
lubricator canister at the proper oil level could
result in unsafe operating conditions and may
cause component damage.
1
2
3
Oil Specification
Oil Type
AWP Super Series • IWP Super Series
Checklist A Procedures
Be sure the platform is fully lowered.
Inspect the lubricator canister for proper oil
level.
Result: The oil level must be within ½ inch /
12.7 mm from the top of the lubricator canister.
To add oil, remove the oil lubricator canister
from the lubricator base and fill with oil. Install
the canister back onto the lubricator base.
1 oil lubricator base
2 oil lubricator canister
10W automotive engine oil
Service Manual
45