Inspect The Breather Cap - Genie AWP Super Series Service Manual

Service Manual
Checklist A Procedures
4 Inspect the chain terminations near the bottom
of each column to confirm that the chain
tensioner bracket is centered in the inspection
hole.
1 chain tensioner bracket
2 adjustment nut (hidden from view)
3 termination rod (hidden from view)
4 column
44
A-15 Ins pec t the Breather C ap
A-15

Inspect the Breather Cap

Genie specifications require that this procedure be
performed every 8 hours or daily, whichever comes
first.
The hydraulic tank is vented to the atmosphere.
The breather cap has an internal air filter that can
clog and may cause the power unit to operate
improperly. If the breather cap is not properly
installed and checked daily, impurities can enter
the hydraulic system and may cause component
damage.
1
AWP Super Series • IWP Super Series
Be sure the breather cap is installed on the
hydraulic power unit tank and is not damaged.
Do not remove it.
September 2016
Part No. 38139