Platform; Platforms - Genie AWP Super Series Service Manual

September 2016

Platform

7-1

7-1 Platforms

Platforms
How to Remove an Aluminum
Platform
1 Place support blocks between the platform
and base. Lower the platform onto the block.
Crushing hazard. Keep away from
the lowering platform.
2 Remove the mounting fasteners from the
platform.
3 Pull the platform away from the mast and
remove it from the machine.
Bodily injury hazard. Safety decals
are essential to safe machine
operation. Failure to replace all
safety and instructional decals
could result in death or serious
injury. If a platform must be
replaced, be sure that all
appropriate safety and
instructional decals are applied to
the new platform.
Part No. 38139
How to Install a Fiberglass
Platform
1
2
3
AWP Super Series • IWP Super Series
Remove the aluminum platform. Refer to
Repair Procedure, How to Remove an
Aluminum Platform.
Support the platform with a lifting device, place
the platform against the mounting angles.
Install the mounting fastener.
Bodily injury hazard. Safety decals
are essential to safe machine
operation. Failure to replace all
safety and instructional decals
could result in death or serious
injury. If a platform must be
replaced, be sure that all
appropriate safety and
instructional decals are applied to
the new platform.
Service Manual
Platform
103