Hydraulic Power Unit Components - Air Powered Models (To Sn Awp04-27778) - Genie AWP Super Series Service Manual

September 2016
3-4
Hydraulic Power Unit Components - Air Powered Models
(to SN AWP04-27778)
Index No. Description
1 Air motor
2 Exhaust Muffler
3 Relief valve
4 Valve N.O. Air Pilot
5 O-ring
6 Hydraulic tank
7 Drain plug
8 Sight gauge
9 Tee fitting (models with Narrow or
Rough Terrain Base Option)
10 Plug fitting (models with Narrow or Rough
Terrain Base Option)
11 Suction strainer
12 Breather cap (from SN 3897-4545)
13 Breather cap (to SN 3897-4544)
14 Check valve
15 Pump
16 Pump/Motor Adaptor Housing
17 Pump adaptor
18 Spider coupler
19 Motor adaptor
Part No. 38139 AWP Super Series • IWP Super Series
Hydraulic Power Unit
Function
100 psi / 6.9 bar @ 80 cfm / 37760 cc/sec
Controls sound emissions
Relief valve
Diverts pump output back to tank during motor start up
Seals tank
3 quarts / 2.8 liters
Drains hydraulic tank
Hydraulic fluid level
Tank vent adaptor
Plug
Filters hydraulic fluid
Hydraulic tank vent/filler
Hydraulic tank vent/filler
Pump output
0.7 to 1 gpm at 2000 psi / 2.6 to 3.76 L/min at 138 bar
Protects coupling components
Connects pump to spider coupler
Connects motor to pump
Connects motor to spider coupler
Service Manual
83