(From Sn Awp03-27390 To Awp08-60145) - Genie AWP Super Series Service Manual

September 2016
3-2
Hydraulic Power Unit - AC Models

(from SN AWP03-27390 to AWP08-60145)

Index No. Description
1 115-230V AC electric motor
2 Capacitor
3 Motor bearing
4 Motor seal
5 Relief valve
6 Pump
7 Solenoid operated N.O. dump valve
8 10V DC coil
9 O-ring
10 Return tube
11 Hydraulic tank
12 Drain plug
13 Breather cap
14 Suction strainer
15 Suction tube
16 Check valve
Part No. 38139
Function
Single phase - 2850/3450 rpm, 50/60 Hz
Motor start circuit
Aligns motor shaft into pump
Seals motor from contaminants
Lift relief
0.5 to 0.6 gallons per minute at 2000 psi /1.89 to 2.27 liters per
minute at 138 bar
Diverts pump output back to tank during motor start up
Activates N.O. dump valve
Seals tank
Returns fluid to tank
3 quarts / 2.8 liters
Drains hydraulic tank
Hydraulic tank vent/filler
Filters hydraulic fluid
Sends fluid to pump
Pump output
AWP Super Series • IWP Super Series
Hydraulic Power Unit
Service Manual
79