Table of Contents
Advertisement
7A4-74
1977 PONTIAC SERVICE MANUAL
REFILLING TRANSMISSION
Follow the procedure as outlined under DRAINING
AND REFILLING TRANSMISSION.
Fig.
7A4-188
Installing Governor
SPEEDOMETER DRIVEN GEAR
Install
1. Install speedometer driven gear into case extension.
2. Install speedometer driven gear retainer and attaching
bolt.
CONVERTER ASSEMBLY
Install
With the transmission in cradle or portable jack, install
the converter assembly into the pump assembly, making
certain that the converter hub drive slots are fully engaged
with the pump drive gear tangs and the converter installed
fully towards the rear of the transmission.
TRANSMISSION ASSEMBLY
Install
Reverse the procedure for transmission removal as
stated under REMOVAL OF TRANSMISSION.
MANUAL LINKAGE
Adjust
Manual linkage adjustment and the associated neutral
safety switch are important from a safety stand point. The
neutral safety switch should be adjusted so that the engine
will start in the Park and Neutral positions only.
With the selector lever in the Park position, the parking
pawl should freely engage and prevent the vehicle from
rolling. The pointer on the indicator quadrant should line up
properly with the range indicators in all ranges.
Advertisement
Table of Contents
