Table of Contents
Advertisement
Titan Instructions for Use - EN
Operating from this screen:
-
Top left button will result in printing the test results of the left and right ears. Note that this will only
occur if a printer is connected to the Titan via Bluetooth or wired to the Titan cradle with the hand
held unit sitting in the cradle
-
Top middle button will bring you to the Select Client & Save Screen from where client data can be
saved. The Titan is made for intuitive use and after saving data Titan prepares itself for a new
measurement by clearing its working memory and returning to the Test screen. You can either
choose to print data before you save it or retrieve saved measurements from the session list and
print later
-
Top right button displays a pop up a message asking, "Delete current or both ears?" when pressed.
The Top left button will cancel the process. The Top middle button will delete the data of the
currently selected ear and bring you back to the Test screen. The Top right button will delete data
on both ears and bring you back to the Test screen
-
Right and Left buttons will respectively select the right or left ear for testing and will bring you back
to the Test screen. If data exists for the test ear, a pop-up will appear asking "Overwrite existing
data?". The Top left and Top right buttons allow yes and no answers respectively
-
Right and Left buttons will respectively select the right or left ear for testing and will bring you back
to the Test screen. Existing data from the chosen ear will only be deleted after pressing "Yes" to
"Overwrite existing data" (except IMP440). If the probe is detected to be in the ear with a proper seal
and the protocol has autostart enabled, a new measurement will automatically overwrite existing
data (IMP440 only)
-
Up and Down buttons allow you to scroll through the different test results. When viewing the first or
last test of an ear, pressing Up or Down respectively will take you to the test results of the other ear.
-
Shoulder box button will result in bringing you back to the Test screen
3.5.5
Select Client & Save
From this screen you can either save data to an existing client that has been uploaded to the Titan from your
database or save data to a new client name. New clients will always get the name "ID #", where # stands for
the next available unique client number.
A maximum of 250 sessions should be stored on the handheld unit.
Operating from this screen:
-
Top left button will bring you back to the Done! screen without saving
and without deleting data
-
Top middle allows you to edit the client name before saving
-
Top right button will save the data to the selected client. After saving
the current measurement, all data is deleted and the Titan returns in the
Test screen, ready for testing
-
Right and Left buttons allow you to jump from the top or bottom of the
client list respectively
-
Up and Down buttons allow you to scroll up and down through the client
list
-
Shoulder box button has no function
Page 41
Advertisement
Table of Contents
