Use Of The Eartone Abr Transducer With Ear Tips, Foam Inserts Or Earcups (Abris440 Only); Use Of The Ip30 Abr Transducer With Ear Tips, Foam Inserts Or Earcups (Abris440 Only) - Interacoustics Titan Instructions For Use Manual

Titan Instructions for Use - EN
Use of the EARTone ABR Transducer with Ear tips, Foam Inserts or
EarCups (ABRIS440 only)
There are two versions of the EARTone ABR transducer for use with the ABRIS440 module.
The ID EARTone ABR transducer is for use with the 3.5mm or 4.0mm infant ear tips, foam insert ear tips or
the Titan probe ear tips via an adaptor. The transducer is labeled "Calibrated for use with inserts".
The ID EARTone Earcup transducer is for use with EarCups via an adaptor. The transducer is labeled
"Calibrated for use with EarCups".
Even though the transducers appear to be the same, ensure you are using the transducer with the
disposable it is calibrated for. Misuse may lead to incorrect results due to differences in the calibration.
Use of the IP30 ABR Transducer with Ear tips, Foam Inserts or EarCups
(ABRIS440 only)
There are two versions of the IP30 ABR transducer for use with the ABRIS440 module.
The ID IP30 ABR transducer is for use with the 3.5mm or 4.0mm infant ear tips, foam insert ear tips or the
Titan probe ear tips via an adaptor. The transducer is labeled "Calibrated for use with inserts".
Page 20