Installation Of The Driver - Interacoustics Titan Instructions For Use Manual

Titan Instructions for Use - EN
3. Upon launching the software for the first time, you will be asked to choose your regional settings
which activate a selection of factory protocols and the Instruction for Use Manual (EN or US) of the
Titan Suite.
Note that all regional factory protocols will be available through the show/hide protocols option for each
separate module. Refer to the Titan Additional Information document for more details.
Note that the language can always be changed by selecting Menu | Setup | Language in the MAIN tab of
the Titan Suite after installation

Installation of the Driver

Now that the Titan Suite software is installed, you must install the driver for the Titan.
1. Connect the Titan via a USB connection (directly or via the cradle) to the PC. Turn the Titan on by
pressing down either the R or L button on the handheld unit.
2. The system will automatically detect the new hardware and a pop-up will appear on the task bar near
the clock indicating that the driver is installed and the hardware is ready to use.
To check that the driver has been installed properly, go to Device Manager and verify Titan appears
under Medical devices.
Page 29