Interacoustics Titan Instructions For Use Manual page 60

Titan Instructions for Use - EN
To upload patient information from Noah 4:
1. Open Noah 4. Make sure the Titan is connected and switched on.
2. Search for and select the patient from the Client Register screen whose
details you want to upload to the Titan hardware. The screen will change to
show the saved sessions of the selected patient.
3. Open the Module Selection dialog box, go to the Measurement tab and
double click on the Titan Suite icon.
4. After the Titan Suite has opened in the Main tab, click on the icon for Client
upload.
5. The single selected patient details from Noah 4 will appear in the Client
search list.
6. Press the Add button to add the patient's details to the Titan hardware.
7. If you want to change the order in which the patients appear on the
hardware, select a patient in the Client on hardware list and use the up
and down arrows to move them in the list.
8. Press Save to Hardware to store the patient data on the hardware.
9. Repeat steps 2 to 8 for all other patients you wish to upload to the
hardware.
10. To remove a patient from the hardware, highlight it in the Clients on
hardware list and click on Remove.
Session download allows saved patient data to be transferred and stored in the
OtoAccess™ or Noah 4 database
To download patient information to OtoAccess™:
1. Launch the OtoAccess™ database and select any patient in the list.
2. Start up the Titan Suite with the Titan connected and switched on. Press
the Session Download icon on the Main tab.
3. A list of stored sessions will automatically be shown. Underneath the Copy
to PC header, select which sessions you would like to copy to the
OtoAccess™ database.
4. Press Download.
Page 56