Interacoustics Titan Instructions For Use Manual page 62

Titan Instructions for Use - EN
1. From the Select client target in database list you can select the patient to
which you want to store these sessions.
2. If your patient is not in the list you can search in the OtoAccess™ database
by selecting the Field you wish to search in and typing a query in the
Search field.
3. Once the correct patient is selected, press Save to store the session in
OtoAccess™.
4. If the patient details are not yet stored in OtoAccess™, press the Enter
new patient button to create a new patient in OtoAccess™. When the New
client data window pops up, enter the relevant patient details and press
OK to save the session to this new patient or press Cancel to abort.
5. The process will now continue for the remaining sessions you have
selected to copy to OtoAccess™. After the last session is stored, the
window will close.
6. Pressing the Skip this Client button skips the patient and sessions shown
on screen and progresses to the next patient selected from the Copy to PC
list. Sessions for the skipped patient are not saved to OtoAccess™, but will
remain on the handheld unit.
After the download process is finished, a confirmation pop up will appear to indicate
that the procedure was successful. Press OK to close the confirmation window.
The Status of download column will now be updated to show which sessions were
downloaded. In the Copy to PC column, the checkboxes for the downloaded
sessions will now be grayed out to avoid downloading them twice to the database.
When the Titan is disconnected from your PC the download screen will be reset.
To download patient information to Noah 4:
When working through Noah 4, only one patient at a time can be selected in the
database. As a result you can only download a single patient session from the hand
held unit at a time.
1. Open Noah 4. Make sure the Titan is connected and switched on.
2. Search for and select the patient from the Client Register screen who you
want to download the saved session to from the handheld unit. The screen
will change to show the saved sessions of the selected patient.
3. Open the Module Selection dialog box, go to the Measurement tab and
double click on the Titan Suite icon.
4. Press the Session Download icon on the Main tab.
5. A list of stored sessions will automatically be shown. Underneath the Copy
to PC header, select which sessions you would like to copy to the Noah 4
client you are working with.
6. Press Download.
Repeat the above process for all sessions to be transferred from the handheld unit
to the Noah 4 database.
Quick Transfer allows for the fast and easy transfer of the last saved patient data
from the Handheld Unit to either the standalone Titan software or to the currently
selected OtoAccess™ or Noah 4 patient file.
Following transfer, the data recorded on the handheld unit will be available for
review and printing from the historic session dropdown list in the respective module
tabs.
Page 58