Titan Instructions for Use - EN
Standalone Installation of Titan Suite
If you do not want to run the Titan Suite through Noah 4 or OtoAccess™ you can make a shortcut on the
desktop to directly launch the Titan Suite as a standalone module.
Go to Start | Programs | Interacoustics | Titan Suite. Right click on Titan Suite and select Send To | Desktop
(create shortcut). A shortcut for the Titan Suite will now appear on your desktop.
Note: Saving sessions in standalone mode will not link the measurements to a specific patient and cannot be
transferred to a patient in the database later.
License
When you receive the Titan product it already contains the license including the software modules you have
ordered. If you would like to add another module that is available in the Titan Suite, please contact your
dealer for a license.
Creating a Bluetooth connection for PC controlled measurements
If you want to use a Bluetooth connection to carry out PC controlled measurements with the Titan, you have
to assure that Bluetooth is installed on your PC. If Windows® asks for a passkey during the installation
process:
The default passkey is 1234.
For further information about setting up a Bluetooth connection, please refer to the Bluetooth Installation
Quick Guides.
Page 30