Table of Contents
Advertisement
Titan Instruction for Use – EN
4. The Titan is now paired to your PC via Bluetooth. Close the dialog box.
5. To confirm the Bluetooth pairing, Start up the Titan Suite from OtoAccess
mode (see the Titan Additional Information Manual for further instructions). Ensure that the Titan is
still switched on.
6. Allow the Bluetooth device to search for the Titan. After a short while, your Titan with a
corresponding identification number will appear in the window below.
7. Click on "Titan xxxxxx" and wait a few seconds to allow it to connect.
8. On connection, the Suite will finish launching and the Titan HHU screen will show "PC-controlled".
Now the Titan can be operated from PC in the same way as if it was connected via a USB cable.
Note: If the Titan will not connect correctly and your PC has its manufacturer's Bluetooth Driver
installed, you may need to uninstall this and then try re-pairing the Titan with your PC.
Page 34
TM
, Noah or in Standalone
Advertisement
Table of Contents
