Toshiba Q9 Installation And Operation Manual page 46

7 — (Communication) Option Board
Use this setting if using the optional Communication Board for frequency control.
8 — RX2
Used for a -10 to +10-volt DC analog input signal.
9 — Option V/I
Allows for the use of the optional voltage/current frequency-control interface.
10 — UP/DOWN Frequency
A discrete terminal may be configured to increase or decrease the speed of the motor by
momentarily connecting the assigned terminal to CC. See
information on this feature.
11 — Pulse (Option)
Used to allow the system to use a pulsed input for frequency control. See
96 for further information on this feature.
12 — Pulse (Motor)
Used to allow the system to use a pulsed input for frequency control. See
96 for further information on this feature.
36
F264 on pg. 103 for further
PG Reference 1 on pg.
PG Reference 1 on pg.
Q9 ASD Installation and Operation Manual