Omron E5AC-T User Manual page 370

svst
• This parameter sets a control or alarm status that is displayed alternately in 0.5-s cycles
on the No. 2 display when the PV is set to be displayed in the No. 1 display.
• PV
Function
• PV/SP*
• PV/Manual MV (Valve Opening)
• PV/SP/Manual MV (Valve Opening)
* This includes when the PV/SP is selected for the Monitor/Setting Item parameter.
off:
Setting
manu:
rst:
alm1:
alm2:
alm3:
alm4:
alm:
ha:
stb:
Related Parameters
See
See
Process Value/Set Point (Operation Level): Page 6-8
PV/MV (Manual MV) (Manual Control Level): Page 6-53
d.ref
• This parameter delays the display refresh period for monitor values. Only display
refreshing is delayed, and the refresh period for process values used in control is not
changed.
Function
• This function is disabled by setting the parameter to OFF.
Setting
E5@C-T Digital Temperature Controllers User's Manual (H185)
SV Status Display Function
No SV status display
MANU is alternately displayed during manual control.
RST is alternately displayed while resetting.
ALM1 is alternately displayed during Alarm 1 status.
ALM2 is alternately displayed during Alarm 2 status.
ALM3 is alternately displayed during Alarm 3 status.
ALM4 is alternately displayed during Alarm 4 status.
ALM is alternately displayed when Alarm 1, 2, 3, or 4 is set to ON.
HA is alternately displayed when an HB alarm or HS alarm is ON.
STB is alternately displayed during standby status.
Display Refresh Period
Setting range
OFF, 0.25, 0.5, 1.0 Seconds
Setting range
Unit Default
0.25
6 Parameters
Default
off
6
6 - 109