Omron E5AC-T User Manual page 359

6 Parameters
sub1
sub2
sub3
sub4
• These parameters set the function to assign to auxiliary outputs 1 to 4.
If c-o is assigned for standard control, a value equivalent to 0% will be output.
*1
*2 If heating/cooling control is used with an E5CC-T Controller that does not have control output 2,
c-o is automatically assigned to auxiliary output 2. If heating/cooling control is used with an
E5EC-T/AC-T Controller that does not have control output 2, c-o is automatically assigned to
auxiliary output 4.
*3 WR1 to WR8 are not displayed when the logic operation function is not used.
If the Controller is equipped with HB/HS alarm detection, it is set by default to ha (Heater Alarm).
*4
6 - 98
Auxiliary Output 1 Assignment
Auxiliary Output 2 Assignment
Auxiliary Output 3 Assignment
Auxiliary Output 4 Assignment
Setting range
none:
Disabled
o:
Control output (heating)
c-o:
Control output (cooling)
alm1:
Alarm 1
alm2:
Alarm 2
alm3:
Alarm 3
alm4:
Alarm 4
ha:
Heater alarm
hb:
HB alarm
hs:
HS alarm
s.err:
Input error
p.end:
Program end output
stg:
Stage output
run:
RUN output
ts1:
Time signal 1 output
ts2:
Time signal 2 output
alm:
Integrated Alarm
wr1:
*3
Work bit 1
wr2:
*3
Work bit 2
wr3:
*3
Work bit 3
wr4:
*3
Work bit 4
wr5:
*3
Work bit 5
wr6:
*3
Work bit 6
wr7:
*3
Work bit 7
wr8:
*3
Work bit 8
There must be an auxiliary output 1.
There must be an auxiliary output 2.
There must be an auxiliary output 3.
There must be an auxiliary output 4.
Auxiliary Output 1 Assignment: alm1
Auxiliary Output 2 Assignment: alm2
*1
Auxiliary Output 3 Assignment: alm3
Auxiliary Output 4 Assignment: alm4
E5@C-T Digital Temperature Controllers User's Manual (H185)
Default
*4
*2
*2
*2