Omron E5AC-T User Manual page 126

Setting Example
This procedure shows how to select segment 0.
Operating Procedure
1
Press the M Key several times in the Program Setting Level to
select the Display Segment Selection parameter.
2
Press the U or D Key to select 0.
The default is end.
If anything other than end is selected and you press the M Key,
*
the first segment parameter for the specified segment number is
displayed.
Setting the Segment Format Parameter (for Rate of Rise
Programming)
This parameter sets the segment format for the specified segment number.
Related Parameters
Parameter name
Segment n Format
Setting Example
The following example shows how to set a ramp segment.
Operating Procedure
1
Specify a segment number for the Display Segment Selection
parameter and press the M Key several times to select the
Segment Format parameter.
2
Press the U or D Key to set ramp (ramp).
The default is ramp (ramp).
Setting the Segment SP Parameter
This parameter sets the SP for the specified segment number.
Related Parameters
Parameter name
Segment n SP
E5@C-T Digital Temperature Controllers User's Manual (H185)
Setting range Default
ramp: Ramp ramp
soak: Soak
step: Step
Display Setting range
sp
SP lower limit to SP upper
limit
4 Basic Operation
Program Setting Level
d.seg
end
d.seg
Level
Program Setting Level
Program Setting Level
styp
ramp
styp
ramp
Unit Default
EU 0
Display Segment
Selection
0
4
Segment 0
Format
Level
Program Setting
Level
4 - 41