Installing The Optional Idrac Port Card - Dell E28S Series Owner's Manual

Installing and removing system components
After you finish
1. Install the iDRAC port card.
2. Install the expansion card riser.
3. Install the cooling shroud.
4. If disconnected, reconnect the network cable.
5. Follow the procedure listed in the After working inside your system section.

Installing the optional iDRAC port card

Before you begin
1. Ensure that you follow the safety guidelines listed in the Safety instructions section.
Dell PowerEdge R430 Owner's Manual
134
Figure 54 Removing the iDRAC port card
a. iDRAC port card holder
b. iDRAC port
c. screw (2)
d. SD vFlash media card
e. iDRAC port card
f. iDRAC port card connector
CAUTION Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.