Idrac Port Card (Optional) - Dell E30S Series Owner's Manual

Store this bracket for future use. Filler brackets must be installed in empty expansion-card slots to maintain FCC
NOTE:
certification of the system. The brackets also keep dust and dirt out of the system and aid in proper cooling and airflow
inside the system.
Figure 69. Installing a GPU card
1. expansion card latch (2)
3. SLI data connector
5. GPU card power connector
Steps
1. Locate the x16 slot on the system board.
2. Insert the GPU card into the slot.
3. Connect the cables from PIB to the GPU card.
4. Close the two expansion card latches.
Next steps
1. Install the expansion card holder.
2. Install the cooling shroud.
3. Follow the procedure listed in the After working inside your system section.

iDRAC port card (optional)

The iDRAC port card consists of a SD vFlash card slot and an iDRAC port. The iDRAC port card is used for advanced
management of the system. An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the
system. It provides persistent on-demand local storage and a custom deployment environment that allows automation of server
configuration, scripts, and imaging. It emulates USB device(s). For more information, see the Integrated Dell Remote Access
Controller User's Guide at Dell.com/esmmanuals.
The iDRAC port card consists of the SD vFlash card slot and an iDRAC port. The iDRAC port card features a dedicated NIC port
and is used for remote, advanced management of the system through the network.
An SD vFlash card is a Secure Digital (SD) card that plugs into the SD vFlash card slot in the iDRAC port card. It provides
persistent on-demand local storage and a custom deployment environment that enables automation of server configuration,
scripts, and imaging. It emulates a USB device. For more information, see the Integrated Dell Remote Access Controller User's
Guide at Dell.com/idracmanuals.
2. GPU card
4. GPU card power connector
6. x16 connector
Installing and removing system components 129