Table of Contents
Advertisement
July 30th, 1996
8000AD(H) - User parameter switch 13
Bits 0 and 1: PSTN access method from behind a PABX
Bit
1
0
Setting
0
0
PSTN
0
1
Loop start
1
0
Ground start (not available in France)
1
1
Flash start
8000AE - 8000AF(H) - User parameter 14 to 15
Not used
8000B8(H) - User function 62 settings
Bits 0 to 3: Not used
Bit 4: Default setting in the Auto Select mode
Bits 5 to 7: Not used
8000B9(H) - User function 62 settings
Bit 0: Night timer
Bits 1 to 3: Not used
Bit 4: RDS operation
Bits 5 and 6: Not used
Bit 7: Daylight saving time
8000BA(H) - User function 62 settings
Bit 0: Not used
Bit 1: Dialing type
Bits 2 to 7: Not used
8000BB(H) - PSTN access number for loop start
Access number
Hex value to program (BCD)
0
ò
0
00
ò
99
8000C8 to 8000DB(H) - RTI (Max. 20 characters - ASCII) - Note 1
8000DC to 8000EF(H) - CSI (Max. 20 characters - ASCII)
8000F0 to 80010F(H) - TTI (Max. 32 characters - ASCII) - Note 1
800110(H) - Number of CSI characters (Hex)
Note 1: If the number of characters is less than the maxumum (20 for RTI, 32 for TTI), add a
stop code (FF[H]) after the last character.
800111 to 80011F(H) - Service station's fax number (Service function 13)
800120 to 80012E(H) - Own fax number (User function 61)
0: Pulse dialing (10 pps), 1: Tone (DTMF) dialing
F0
ò
F0
00
ò
99
4-73
SERVICE TABLES AND PROCEDURES
SERVICE RAM ADDRESSES
0: Auto Receive Mode, 1: Fax Mode
0: Disabled, 1: Enabled
0: Not acceptable
1: Acceptable for the limit specified by
system switch 03
0: Disabled, 1: Enabled
Advertisement
Table of Contents
