Ricoh infotec 3671F Service Manual page 124

SERVICE TABLES AND PROCEDURES
SERVICE RAM ADDRESSES
8000A3(H) - User parameter switch 03 (Automatic report printout)
Bit 0: Transmission result report (memory transmissions)
Bit 1: Not used
Bit 2: Memory storage report
Bit 3: Not used
Bit 4: Polling result report (polling reception)
Bit 5: Transmission result report (immediate transmissions)
Bit 6: Not used
Bit 7: TCR (Journal)
8000A4(H) - User parameter switch 04
Bits 0 to 6: Not used
Bit 7: Inclusion of a sample image on reports
8000A5(H) - User parameter switch 05
Bit 0: Substitute reception
Bit 1: Memory reception if no RTI or CSI received
Bits 2 to 5: Not used
Bits 6 and 7: Fusing lamp during the energy saver mode
Bit 7 6 Setting
0 0 Lamp off
1 0 Standby temperature (100 °C)
8000A6(H) - User parameter switch 06
Bit 0: TTI
Bits 1 to 3: Not used
Bit 4: Batch transmission
Bits 5 to 7: Not used
8000A7(H) - User parameter switch 07
Bits 0 to 7: Not used
8000A8(H) - User parameter switch 08
Bits 0 to 7: Not used
8000A9(H) - User parameter switch 09
Bits 0 to 7: Not used
8000AA(H) - User parameter switch 10
Bits 0 to 6: Not used
Bit 7: Halftone type
8000AB(H) - User parameter switch 11
Bits 0 to 7: Not used
8000AC(H) - User parameter switch 12
Bit 1: Distinctive Ring Detection (This mode is only used in the US.)
Bit 2: Toner saving mode
Bits 3 and 4: Printout image density (Fax mode)
Bit 4 3 Setting
0 0 Normal
0 1 Lighten
1 0 Darken
1 1 Not used
Bits 5 to 7: Not used
0: Possible, 1: Impossible
0: Error diffusion, 1: Dither
0: Disabled, 1: Enabled
0: Disabled, 1: Enabled
4-72
July 30th, 1996
0: Off, 1: On
0: Off, 1: On
0: Off, 1: On
0: Off, 1: On
0: Off, 1: On
0: Off, 1: On
0: Off, 1: On
0: Off, 1: On
0: Off, 1: On