Ricoh infotec 3671F Service Manual page 74

SERVICE TABLES AND PROCEDURES
BIT SWITCHES
System Switch 0A
No FUNCTION
0-3 Not used
Dialing on the ten-key pad
when the handset is off-hook
4
0: Disabled 1: Enabled
On hook dial
5
0: Disabled 1: Enabled
6 Not used
7
System Switch 0B
No FUNCTION
Automatic reset timer
Bit 1 Bit 0 Timer setting
0
0 0 1 minute
0 1 3 minutes
1
1 0 5 minutes
1 1 No limit
Power Saver Mode timer
Bit 3 Bit 2 Time Limit
2
0 0 1 minute
0 1 3 minutes
3
1 0 5 minutes
1 1 No limit
4-7 Not used
System Switch 0C - Not used (do not change the settings)
System Switch 0D - Not used (do not change the settings)
System Switch 0E - Not used (do not change the settings)
COMMENTS
Do not change the settings.
1: The user can dial on the machine's ten-key pad
when the handset is off-hook.
0: On hook dial is disabled.
Do not change the settings.
COMMENTS
(1, 1): Automatic reset is disabled.
(Other): The machine returns to the standby mode
when the timer expires after the last operation.
(1, 1): Automatic Power Saver Mode is disabled.
(Other): The machine goes into a Power Saver Mode
when the timer expires after the last operation.
Cross reference
Power Saver Mode: Sections 2.2.8 and 2.3.1
Do not change the settings.
4-22
July 30th, 1996