Ricoh infotec 3671F Service Manual page 79

July 30th, 1996
4.2.3. Printer Switches
Printer Switch 00
No FUNCTION
Page separation mark
0: Disabled
1: Enabled
0
Repetition of data when the
received page is longer than
the printer paper
1
0: Disabled 1: Enabled
2-7 Not used
Printer Switch 01 - Not used (do not change the settings)
Printer Switch 02 - Not used (do not change the settings)
Printer Switch 03
No FUNCTION
Length reduction of
received data
0: Disabled
1: Enabled
0
1-3 Not used
SERVICE TABLES AND PROCEDURES
COMMENTS
0: No marks are printed.
1: If a received page has to be printed out on two
sheets, an "x" inside a small box is printed at the
bottom right hand corner of the first sheet, and a "2"
inside a small box is printed at the top right hand
corner of the second sheet. This helps the user to
identify pages that have been split up.
0: The next page continues from where the previous
page left off.
1: The final few mm of the previous page are printed at
the top of the next page.
See section 2.2.9 for details.
Do not change the settings.
COMMENTS
0: Incoming pages are printed without length
reduction.
Cross reference
Page separation threshold: Printer Sw. 03, bits 4 to 7.
1: Incoming pages are reduced in the length direction
when printing.
Cross reference
Reduction ratio: Printer Switches 04/05
Page separation and data reduction: section 2-2-9
Do not change the settings.
4-27
BIT SWITCHES