Table of Contents
Advertisement
July 30th, 1996
G3 Switch 05
FUNCTION
Initial Tx modem rate
Bit 3 2 1 0 Setting (bps)
0 0 0 1 2.4k
0 0 1 0 4.8k
0
0 0 1 1 7.2k
to
3
0 1 0 0 9.6k
0 1 0 1 12.0k
0 1 1 0 14.4k
Other settings - Not used
Initial modem type for 9.6 k or 7.2 kbps.
Bit 5 Bit 4
Setting
4
0
0
V.29
0
1
V.17
5
1
0
V.34
1
1
Not used
6-7
G3 Switch 06
FUNCTION
Initial Rx modem rate
Bit 3 2 1 0 Setting (bps)
0 0 0 1 2.4 k
0 0 1 0 4.8 k
0
to
0 0 1 1 7.2 k
3
0 1 0 0 9.6 k
0 1 0 1 12.0k
0 1 1 0 14.4k
Other settings - Not used
Modem types available for reception
Bit 7 6 5 4 Setting
4
0 0 0 1 V27ter
to
0 0 1 0 V27ter and V29
7
0 1 0 0 V27ter, V29, V33, V17
Other settings - Not used
SERVICE TABLES AND PROCEDURES
COMMENTS
These bits set the initial starting modem
rate for transmission.
Use the dedicatated transmssion
parameters if you need to change this for
specific receivers.
These bits set the initial modem type for
14.4, 9.6, and 7.2 kbps, if the initial
modem rate is set at these speeds.
Do not change the settings.
COMMENTS
The setting of these bits is used to inform
the transmitting terminal of the available
modem rate for the machine in receive
mode.
Use a lower setting if high speeds pose
problems during reception.
The setting of these bits is used to inform
the transmitting terminal of the available
modem type for the machine in receive
mode.
4-37
BIT SWITCHES
Advertisement
Table of Contents
