Ricoh infotec 3671F Service Manual page 61

July 30th, 1996
4.1.15. ADF Test (Function 10)
1.
then immediately
2.
3.
4. Place a document in the feeder,
then press
5. To stop the test, press
6. Finish:
4.1.16. Shading Test (Function 10)
Do the following after replacing the contact image sensor or the FCU.
(Also after RAM reset level 1.)
1.
then immediately
2.
3.
4. Open the ADF cover and
hold the image sensor
shading chart [A] (P/N:
H0689300) against the
sensor as shown in the dia-
gram.
5. Press .
.
[A]
4-9
SERVICE TABLES AND PROCEDURES
SERVICE LEVEL FUNCTIONS
FUNCTION KPAD/NEXT
SERVICE FUNCTIONS
0-LAMP 1-ADF
2-SHADING
ADF
FUNCTION KPAD/NEXT
SERVICE FUNCTIONS
0-LAMP 1-ADF
2-SHADING
SHADING
START
START
H528M502.wmf