Ricoh infotec 3671F Service Manual page 95

July 30th, 1996
Address
International dial tone detection
807F38
time
International dial tone reset time
807F39
(LOW)
International dial tone reset time
807F3A
(HIGH)
International dial tone continuous
807F3B
tone time
International dial tone permissible
807F3C
drop time
International dial wait interval
807F3D
(LOW)
International dial wait interval
807F3E
(HIGH)
Country dial tone upper frequency
807F3F
limit (HIGH)
Country dial tone upper frequency
807F40
limit (LOW)
Country dial tone lower frequency
807F41
limit (HIGH)
Country dial tone lower frequency
807F42
limit (LOW)
807F43 Country dial tone detection time
Country dial tone reset time (LOW)
807F44
Country dial tone reset time
807F45
(HIGH)
Country dial tone continuous tone
807F46
time
Country dial tone permissible drop
807F47
time
Country dial wait interval (LOW)
807F48
807F49 Country dial wait interval (HIGH)
Time between opening or closing
807F4A the Ds relay and opening the Di
relay
Break time for pulse dialing
807F4B
Make time for pulse dialing
807F4C
Time between final Di relay
807F4D closure and Ds relay opening or
closing
Minimum pause between dialed
807F4E
digits (pulse dial mode)
Time waited when a pause is
807F4F
entered at the operation panel
807F50 DTMF tone on time
807F51 DTMF tone off time
Function
4-43
SERVICE TABLES AND PROCEDURES
NCU PARAMETERS
Unit Remarks
20 ms If 807F38 contains FF, the
machine pauses for the
pause time (807F3D /
807F3E).
See Note 3 (Belgium).
Hz (BCD) See Note 2.
20 ms If 807F43 contains FF, the
machine pauses for the
pause time (807F48 /
807F49).
1 ms See Notes 4 and 7.
Function 08 (parameter 11).
1 ms See Note 4. Function 08
(parameter 12).
1 ms See Note 4. Function 08
(parameter 13).
1 ms See Notes 4 and 7.
Function 08 (parameter 14).
20 ms See Note 4. Function 08
(parameter 15).
Function 08 (parameter 16).
See Note 4.
1 ms Function 08 (parameter 17).
Function 08 (parameter 18).