July 30th, 1996
6.3.11. Fusing Unit
[A]
A: Fusing Unit (3 screws, 1 screw with
ground plate, 1 connector, entrance guide)
Remove the fusing cover (see Fusing Cover and Harness Cover) and the
transfer unit (see Transfer Unit).
6.3.12. Thermistor, Thermostat, and Exit Sensor
Remove the fusing unit (see Fusing Unit), then remove the thermistor [A] with
bracket (1 screw).
[A]
A: Thermistor (1 screw, 1 har-
ness clamp)
B: Thermostat (2 screws)
C: Exit Sensor (3 hooks)
REPLACEMENT AND ADJUSTMENT
[B]
6-19
PRINTER
h528r525.wmf
[C]
h528r526.wmf