Table of Contents
Advertisement
July 30th, 1996
System Switch 05
No
FUNCTION
0-1 Not used
Display of both RTI and CSI
2
on the LCD
0: Disabled 1: Enabled
3-7 Not used
System Switch 06
No
FUNCTION
Use of the Stop key during
0
memory transmission
0: Disabled 1: Enabled
1-7 Not used
System Switch 07 - Not used (do not change the settings)
System Switch 08 - Not used (do not change the settings)
System Switch 09
No
FUNCTION
Not used
0
Inclusion of communications
on the TCR when no image
data was exchanged.
1
0: Disabled 1: Enabled
Automatic error report
printout
2
0: Disabled 1: Enabled
Printing of the error code on
3
the error report
0: No 1: Yes
Not used
4
Power failure report
0: Disabled 1: Enabled
5
6
Not used
Priority given to various
types of remote terminal ID
when printing reports
7
0: RTI > CSI > Dial label >
Tel. number
1: Dial label > Tel. number
> RTI > CSI
SERVICE TABLES AND PROCEDURES
COMMENTS
Do not change the settings.
1: Both RTI and CSI will be displayed alternately on
the LCD.
Do not change the settings.
COMMENTS
1: Memory transmissions can be stopped by pressing
the Stop key. However, users might accidentally cancel
another person's memory transmission in progress.
Do not change the settings.
COMMENTS
Do not change the setting.
0: Communications which reached phase C (message
tx/rx) of the T.30 protocol are listed on the TCR
(Journal).
1: Communications which reached phase A (call setup)
of T.30 protocol are listed on the TCR (Journal). This
will include telephone calls.
0: Error reports will not be printed.
1: Error reports will be printed automatically after failed
communications.
1: Error codes are printed on the error reports.
Do not change the setting.
1: A power failure report will be automatically printed
after the power is switched on if a fax message
disappeared from the memory when the power was
turned off last.
Do not change the settings.
This bit determines which set of priorities the machine
uses when listing remote terminal names on reports.
Dial Label: The name stored with the Quick/Speed Dial
number by the user.
4-21
BIT SWITCHES
Advertisement
Table of Contents
