Heat Sink Enclosure; Figure 4-12: Vga Connector - IEI Technology NANO-KBN-i1 User Manual
Epic sbc s upports amd embedded g-series soc with
vga/hdmi/lvds, dual pcie gbe, usb 3.0, pcie mini, sata 6gb/s , msata, com, iris-1010, hd audio and rohs
Hide thumbs
Also See for NANO-KBN-i1:
- Quick installation manual (17 pages) ,
- Quick installation manual (17 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
Figure 4-12: VGA Connector
Secure the connector. Secure the DB-15 VGA connector from the VGA
S te p 8:
monitor to the external interface by tightening the two retention screws on either
side of the connector.
4.7 He a t S in k En c lo s ure
WARNING:
Never run the NANO-KBN-i1 without the heat sink secured to the
board. The heat sink ensures the system remains cool and does not
need addition heat sinks to cool the system.
When the NANO-KBN-i1 is shipped it is secured to a heat sink with eight retention screws.
If the NANO-KBN-i1 must be removed from the heat sink, the eight retention screws must
be removed.
P a g e 62
NANO-KBN-i1
Advertisement
Table of Contents
