Configure Dhcp Server Settings - IEI Technology NANO-KBN-i1 User Manual
Epic sbc s upports amd embedded g-series soc with
vga/hdmi/lvds, dual pcie gbe, usb 3.0, pcie mini, sata 6gb/s , msata, com, iris-1010, hd audio and rohs
Hide thumbs
Also See for NANO-KBN-i1:
- Quick installation manual (17 pages) ,
- Quick installation manual (15 pages) ,
- Quick installation manual (17 pages)
Table of Contents
Advertisement
NANO-KBN-i1
B.5.1 Co n fig u re DHCP S e rve r S e ttin g s
Install the DHCP
S te p 1:
#yum install dhcp
#apt-get install dhcp3-server
Confirm the operating system default settings: dhcpd.conf.
S te p 2:
CentOS
Use the following command to show the DHCP server sample location:
#vi /etc/dhcpd.conf
The DHCP server sample location is shown as below:
Use the following command to copy the DHCP server sample to etc/dhcpd.conf:
#cp /usr/share/doc/dhcp-3.0.5/dhcpd.conf.sample /etc/dhcpd.conf
#vi /etc/dhcpd.conf
Debian
#vi /etc/dhcpd.conf
Edit "/etc/dhcpd.conf" for your environment. For example, add
next-server PXE server IP address;
(CentOS, commands marked in red)
(Debian, commands marked in blue)
P a g e 123
Advertisement
Table of Contents
