One Key Recovery Introduction; Figure B-1: Iei One Key Recovery Tool Menu; B.1 O Ne K Ey R Ecovery I Ntroduction - IEI Technology NANO-KBN-i1 User Manual

B.1 On e Ke y Re c o ve ry In tro d u c tio n
The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup
and recovery tool. This tool provides quick and easy shortcuts for creating a backup and
reverting to that backup or reverting to the factory default settings.
The IEI One Key Recovery tool menu is shown below.

Figure B-1: IEI One Key Recovery Tool Menu

Prior to using the IEI One Key Recovery tool (as shown in Figure B-1) to backup or
restore Windows system, five setup procedures are required.
1. Hardware and BIOS setup (see Section
2. Create partitions (see Section B.2.2)
3. Install operating system, drivers and system applications (see Section B.2.3)
4. Build the recovery partition (see Section B.2.4)
5. Create factory default image (see Section B.2.5)
After completing the five initial setup procedures as described above, users can access
the recovery tool by pressing <F3> while booting up the system. The detailed information
of each function is described in Section B.4.
NOTE:
The initial setup procedures for Linux system are described in
Section B.3.
P a g e 98
NANO-KBN-i1
B.2.1)