So-Dimm Installation; Figure 4-1: So-Dimm Installation - IEI Technology NANO-KBN-i1 User Manual

4.3 S O-DIMM In s ta lla tio n
WARNING:
Using incorrectly specified SO-DIMM may cause permanently damage
the NANO-KBN-i1. Please make sure the purchased SO-DIMM
complies with the memory specifications of the NANO-KBN-i1.
SO-DIMM specifications compliant with the NANO-KBN-i1 are listed in
the specification table of Chapter 1.
To install an SO-DIMM, please follow the steps below and refer to Figure 4-1.

Figure 4-1: SO-DIMM Installation

Locate the SO-DIMM socket. Place the board on an anti-static mat.
S te p 1:
S te p 2: Align the SO-DIMM with the socket. Align the notch on the memory with the
notch on the memory socket.
Insert the SO-DIMM. Push the memory in at a 20º angle. (See Figure 4-1)
S te p 3:
Seat the SO-DIMM. Gently push downwards and the arms clip into place. (See
S te p 4:
Figure 4-1)
P a g e 50
NANO-KBN-i1