Figure B-22: Partitions For Linux - IEI Technology NANO-KBN-i1 User Manual
Epic sbc s upports amd embedded g-series soc with
vga/hdmi/lvds, dual pcie gbe, usb 3.0, pcie mini, sata 6gb/s , msata, com, iris-1010, hd audio and rohs
Hide thumbs
Also See for NANO-KBN-i1:
- Quick installation manual (17 pages) ,
- Quick installation manual (15 pages) ,
- Quick installation manual (17 pages)
Table of Contents
Advertisement
NOTE:
Please reserve enough space for partition 3 for saving recovery
images.
Figure B-22: Partitions for Linux
S te p 3:
Create a recovery partition. Insert the recovery CD into the optical disk drive.
Follow
Step 1
commands (marked in red) to create a partition for recovery images.
system32>diskpart
DISKPART>list vol
DISKPART>sel disk 0
DISKPART>create part pri size=
DISKPART>assign letter=N
DISKPART>exit
system32>format N: /fs:ntfs /q /v:Recovery /y
system32>exit
S te p 4:
Build the recovery partition. Press any key to boot from the recovery CD. It will
take a while to launch the recovery tool. Please be patient. When the recovery
tool setup menu appears, type <3> and press <Enter> (Figure B-23). The
Symantec Ghost window appears and starts configuring the system to build a
recovery partition. After completing the system configuration, press any key to
reboot the system. Eject the recovery CD.
P a g e 114
~
Step 3
described in Section B.2.2. Then type the following
___
NANO-KBN-i1
Advertisement
Table of Contents
