System Configuration; At/Atx Mode Select Switch; Figure 4-2: At/Atx Mode Select Switch Location; Table 4-1: At/Atx Mode Select Switch Settings - IEI Technology NANO-KBN-i1 User Manual

NANO-KBN-i1
4.4 S ys te m Co n fig u ra tio n
The system configuration is controlled by buttons, jumpers and switches. The system
configuration should be performed before installation.
4.4.1 AT/ATX Mo d e S e le c t S witc h
CN La b e l:
CN Typ e :
CN Lo c a tio n :
CN S e ttin g s :
The AT/ATX mode select switch specifies the systems power mode as AT or ATX.
AT/ATX mode select switch settings are shown in Table 4-1.
Setting
Short A-B
Short B-C

Table 4-1: AT/ATX Mode Select Switch Settings

The location of the AT/ATX mode select switch is shown in Figure 4-2 below.

Figure 4-2: AT/ATX Mode Select Switch Location

J_ATX_AT1
switch
See Figure 4-2
See Table 4-1
Description
AT Mode
ATX Mode Default
P a g e 51