Hdmi Display Device Connection; Lan Connection; Figure 4-9: Hdmi Connection - IEI Technology NANO-KBN-i1 User Manual

NANO-KBN-i1
4.6.1 HDMI Dis p la y De vic e Co n n e c tio n
The HDMI connector transmits a digital signal to compatible HDMI display devices such
as a TV or computer screen. To connect the HDMI cable to the NANO-KBN-i1, follow the
steps below.
Locate the HDMI connector. The location is shown in Chapter 3.
S te p 1:
Align the connector. Align the HDMI connector with the HDMI port. Make sure
S te p 2:
the orientation of the connector is correct.

Figure 4-9: HDMI Connection

S te p 3: Insert the HDMI connector. Gently insert the HDMI connector. The connector
should engage with a gentle push. If the connector does not insert easily, check
again that the connector is aligned correctly, and that the connector is being
inserted with the right way up.
4.6.2 LAN Co n n e c tio n
There are two external RJ-45 LAN connectors on the external peripheral interface panel.
The RJ-45 connector enables connection to an external network. To connect a LAN cable
with an RJ-45 connector, please follow the instructions below.
Locate the RJ-45 connector. The location of the LAN connector is shown in
S te p 1:
P a g e 59