Sata Drive Connection; Figure 4-6: Audio Kit Cable Connection - IEI Technology NANO-KBN-i1 User Manual
Epic sbc s upports amd embedded g-series soc with
vga/hdmi/lvds, dual pcie gbe, usb 3.0, pcie mini, sata 6gb/s , msata, com, iris-1010, hd audio and rohs
Hide thumbs
Also See for NANO-KBN-i1:
- Quick installation manual (17 pages) ,
- Quick installation manual (16 pages) ,
- Quick installation manual (17 pages)
Table of Contents
Advertisement
Figure 4-6: Audio Kit Cable Connection
Connect the audio devices. Connect speakers to the line-out audio jack.
S te p 3:
Connect the output of an audio device to the line-in audio jack. Connect a
microphone to the mic-in audio
4.5.2 S ATA Drive Co n n e c tio n
The NANO-KBN-i1 is shipped with a SATA drive cable. To connect the SATA drive to the
connector, please follow the steps below.
S te p 1:
Locate the SATA connector and the SATA power connector. The locations of
the connectors are shown in Chapter 3.
S te p 2:
Insert the cable connector. Insert the cable connector into the on-board SATA
drive connector and the SATA power connector. See Figure 4-7.
P a g e 56
jack.S te p 0:
NANO-KBN-i1
Advertisement
Table of Contents
