Figure B-14: Select A Local Source Drive; Figure B-15: Select A Source Partition From Basic Drive - IEI Technology NANO-KBN-i1 User Manual

Figure B-14: Select a Local Source Drive

S te p 6: Select a source partition (Part 1) from basic drive as shown in Figure B-15.
Then click OK.

Figure B-15: Select a Source Partition from Basic Drive

Select 1.2: [Recovery] NTFS drive and enter a file name called
S te p 7:
(Figure B-16). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be iei.GHO.
P a g e 110
NANO-KBN-i1
iei