Vga Monitor Connection; Figure 4-11: Usb Connector - IEI Technology NANO-KBN-i1 User Manual
Epic sbc s upports amd embedded g-series soc with
vga/hdmi/lvds, dual pcie gbe, usb 3.0, pcie mini, sata 6gb/s , msata, com, iris-1010, hd audio and rohs
Hide thumbs
Also See for NANO-KBN-i1:
- Quick installation manual (17 pages) ,
- Quick installation manual (15 pages) ,
- Quick installation manual (17 pages)
Table of Contents
Advertisement
NANO-KBN-i1
Figure 4-11: USB Connector
4.6.4 VGA Mo n ito r Co n n e c tio n
The NANO-KBN-i1 has a single female DB-15 connector on the external peripheral
interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect
a monitor to the NANO-KBN-i1, please follow the instructions below.
S te p 5:
Locate the female DB-15 connector. The location of the female DB-15
connector is shown in Chapter 3.
S te p 6:
Align the VGA connector. Align the male DB-15 connector on the VGA screen
cable with the female DB-15 connector on the external peripheral interface.
Insert the VGA
S te p 7:
insert the male connector from the VGA screen into the female connector on the
NANO-KBN-i1. See Figure 4-12.
connector.
Once the connectors are properly aligned with the
P a g e 61
Advertisement
Table of Contents
