Breakers - GE L60 Instruction Manual

SYSTEM SETUP
This configuration can be used on a two-winding transformer, with one winding connected into a breaker-and-a-half
system. The following figure shows the arrangement of sources used to provide the functions required in this application,
and the CT/VT inputs that are used to provide the data.
5
Y LV
SRC 1
Phase CT M1
Ground CT M1
Phase VT M5
Aux VT None

5.4.4 Breakers

SETTINGS  SYSTEM SETUP  BREAKERS  BREAKER 1(2)
 BREAKER 1

5-130
Figure 5-58: Example of use of sources
D HV AUX
SRC 2 SRC 3
F1+F5 None
None None
None None
None U1
BREAKER 1

FUNCTION: Disabled
BREAKER1 PUSH BUTTON

CONTROL: Disabled
BREAKER 1 NAME:

Bkr 1
Range: Disabled, Enabled
Range: Disabled, Enabled
Range: up to six alphanumeric characters
L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL
CHAPTER 5: SETTINGS