Digital Counters; Selector Switches; Flex States; Ethernet - GE L60 Instruction Manual

CHAPTER 6: ACTUAL VALUES

6.3.11 Digital counters

ACTUAL VALUES  STATUS  DIGITAL COUNTERS  DIGITAL COUNTERS Counter 1(8)
 DIGITAL COUNTERS
 Counter 1
The present status of the eight digital counters displays here. The status of each counter, with the user-defined counter
name, includes the accumulated and frozen counts (the count units label also appears). Also included, is the date and time
stamp for the frozen count. The

6.3.12 Selector switches

ACTUAL VALUES  STATUS  SELECTOR SWITCHES
 SELECTOR SWITCHES

The display shows both the current position and the full range. The current position only (an integer from 0 through 7) is the
actual value.

6.3.13 Flex States

ACTUAL VALUES  STATUS  FLEX STATES
 FLEX STATES

TM
There are 256 FlexState bits available. The second line value indicates the state of the given FlexState bit.

6.3.14 Ethernet

ACTUAL VALUES  STATUS  ETHERNET
 ETHERNET

These values indicate the status of the first, second, and third Ethernet links.
L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL
Counter 1 ACCUM:

0
Counter 1 FROZEN:

0
Counter 1 FROZEN:

1970/01/01 00:00:00
Counter 1 MICROS:

0
value refers to the microsecond portion of the time stamp.
COUNTER 1 MICROS
SELECTOR SWITCH 1

POSITION: 0/7
SELECTOR SWITCH 2

POSITION: 0/7
PARAM 1: Off

Off

PARAM 256: Off

Off
ETHERNET PRI LINK

STATUS: Fail
ETHERNET SEC LINK

STATUS: Fail
ETHERNET TER LINK

STATUS: Fail
Range: YYYY/MM/DD HH:MM:SS
Range: 0 to 4294967295 in steps of 1
Range: Current Position / 7
Range: Current Position / 7
Range: On, Off
Range: On, Off
Range: Fail, OK
Range: Fail, OK
Range: Fail, OK
STATUS
6
6-7