GE L60 Instruction Manual page 167

CHAPTER 4: INTERFACES
Same Size
4.4.7.4 Advanced Actions toolbar
Only basic objects (lines, rectangles, ellipses) can be rotated and flipped.
Only objects from the Drawing Toolbar can be structured (grouped, ungrouped, forward, backward).
Nudge Up, Down, Left, Right
Rotate
Rotate Left, Right
Flip Vertical
Flip Horizontal
Group, Ungroup
Front, Back
Forward, Backward
L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL
FLEXLOGIC DESIGN AND MONITORING USING ENGINEER
Set the width and height of the selected components to the same width and height of
the reference component
Moves selected component one pixel upward, downward, left, right
Rotates selected component freely. Once selected, put your mouse cursor over the
component and move the component clockwise or counter-clockwise depending on
what you need.
Rotates selected component 90 degrees counter-clockwise or clockwise
Flips the selected component on the vertical axis
Flips the selected component on the horizontal axis
Combines all selected components into one combined entity. Ungroups them into
separate components.
Moves current components to the absolute front or back of all viewable layers
Moves current components on layer higher or lower than its original layer hierarchy
4
4-57