GE L60 Instruction Manual page 102
Line phase comparison system
Hide thumbs
Also See for L60:
- Instructions manual (768 pages) ,
- Instruction manual (736 pages) ,
- Communications manual (532 pages)
Table of Contents
Advertisement
ADD DEVICE TO SOFTWARE
3.
Click the Quick Connect button to open the window.
3
4.
Select the Ethernet interface and enter the IP address assigned to the L60, then click the Connect button. The
EnerVista UR Setup software creates a site named "Quick Connect" with a corresponding device also named "Quick
Connect" and displays them on the left side of the screen.
5.
Expand the sections to view data directly from the L60 device.
Each time that the EnerVista UR Setup software is initialized, click the Quick Connect button to establish direct
communications to the L60. This ensures that configuration of the EnerVista UR Setup software matches the L60 model
number.
When direct communications with the L60 via Ethernet is complete, make the following changes:
1.
From the Windows desktop, right-click the My Network Places icon and select Properties to open the network
connections window.
2.
Right-click the Local Area Connection icon and select the Properties item.
3.
Select the Internet Protocol (TCP/IP) item from the list provided and click the Properties button.
4.
Set the computer to "Obtain a relay address automatically" as shown.
3-52
L60 LINE PHASE COMPARISON SYSTEM – INSTRUCTION MANUAL
CHAPTER 3: INSTALLATION
Advertisement
Table of Contents
