Scanner Sp Mode; Sp1-Xxx (System And Others) - Ricoh SAVIN D0AP Service Manual

5.11 SCANNER SP MODE

5.11.1 SP1-XXX (SYSTEM AND OTHERS)

1001 [Scan Nv Version]
Operates automatic initialization to ensure that scanner NV is initialized if necessary.
To do this SP, specify the version of scanner NV within 9 characters.
"Function name"_"Machine code"_"Serial number"
- Function name: Enter "3".
- Machine code: Enter the machine code with three characters.
- Serial number: Enter the number (default: 001).
1-001-005 -
1005 [Erase margin]
Creates an erase margin for all edges of the scanned image.
If the machine has scanned the edge of the original, create a margin. This SP is
activated only when the machine uses TWAIN scanning.
1-005-001 Range from 0 to 5 mm
1009 [Remote scan disable]
Enable or disable remote scan.
1-009-001 0:Enable 1:Disable
1010 [Non Display Clear Light PDF]
Enable or disable remote scan.
1-010-001 0:Enable 1:Disable
1011 [Org count Disp]
Selects the original counter display.
0: Displays remaining memory for the original scanning..
1: Displays original counter.
1-011-001 0:ON 1:OFF
1012 [UserInfo release]
Clear the following settings:
Address, Sender, Text / Subject, Filename
SM
CTL*
CTL*
CTL*
CTL*
CTL*
5-115
Scanner SP Mode
-
[0 to 5 / 0 / 1 mm]
[0 or 1 / 0 / - ]
0: enable, 1: disable
[0 or 1 / 0 / - ]
0: Display, 1: No display
[0 or 1 / 0 / - ]
D0AP/D0C4/D0C5/D0C6/M0BQ/M0D1