If you are instructed to return the server component or optional device, follow all packaging instructions,
and use any packaging materials for shipping that are supplied to you.
Replacing the 240 VA safety cover
Use this information to replace the 240 VA safety cover.
Read the safety information in "Safety" on page v and "Installation guidelines" on page 33.
If you are replacing a server component in the server, you need to turn off the server and peripheral devices,
and disconnect the power cords and all external cables.
To replace the 240 VA safety cover, complete the following steps:
Step 1.
Align the safety cover with the standoffs on the power paddle card and lower the safety cover
onto the power paddle card until it is secure.
240 VA safety cover
.
Chapter 6
Removing and replacing components
187