Updating The Server Configuration - Lenovo System x3250 M4 Installation And Service Manual

Power-cord
connector
AC Power LED
(green)
DC Power LED
Power-supply
(green)
error LED
(amber)
The following illustration shows the locations of the input and output connectors on the rear of the server.
Power-cord
connector
AC Power LED
(green)
DC Power LED
Power-supply
(green)
error LED
(amber)
Power-cord
connector
AC
DC
AC Power LED
(green)
DC Power LED
Power-supply
(green)
error LED
(amber)
Step 1. You must turn off the server before you connect or disconnect cables.
Step 2. See the documentation that comes with any external devices for additional cabling instructions. It
might be easier for you to route cables before you connect the devices to the server.
Step 3. Cable identifiers are printed on the cables that come with the server and optional devices. Use
these identifiers to connect the cables to the correct connectors.

Updating the server configuration

Use this information to update the server configuration.
When you start the server for the first time after you add or remove a device, you might receive a message
that the configuration has changed. The Setup utility starts automatically so that you can save the new
configuration settings.
58
Lenovo System x3250 M4 Installation and Service Guide
Ethernet 1 Ethernet 2
Ethernet 1
link LED activity LED link LED
Serial
connector
USB 3-4 connector
Video USB 1-2 connector
connector
Ethernet 1
Ethernet 1 Ethernet 2
activity LED link LED
link LED
Serial
connector
USB 3-4 connector
USB 1-2 connector
Video
connector
Ethernet 1 Ethernet 2
Ethernet 1
link LED activity LED link LED
Serial
connector
AC
DC
USB 3-4 connector
Video USB 1-2 connector
connector
Ethernet 2
PCI slot 1
activity LED
NMI button
Ethernet 2
PCI slot 1
activity LED
NMI button
Ethernet 2
PCI slot 1
activity LED
NMI button
PCI slot 2
PCI slot 2
PCI slot 2